1.Set the selector lever to
the "N" position. |
![]() |
2.Loosen the control cable
to the manual control lever adjusting nut to free the cable
and
lever. 3.Set the manual control lever to the neutral position. |
![]() |
5.Tighten the transmission
control cable using the adjusting nut with the specified
torque. Tightening torque: 9.5 ± 3.5 N·m 6.Check that the selector lever is in the N position. 7.Check that each position of the manual control lever matches each position of the selector lever using M.U.T.-III MB991958 (M.U.T.-III sub assembly). |