DIAGNOSIS PROCEDURE |
STEP 1. Check the A/T-ECU terminal voltage. |
[A/T-ECU connector (harness side, connected)] |
Measure the voltage between the PDUP terminal and body earth. |
|
|
|
Q.
Is the check result normal?
|
Go to Step 2. |
|
Go to Step 3. |
|
STEP 2. Check the A/T-ECU connector, vehicle-side wiring harness connector pin terminal, and the connection status. |
Q.
Is the check result normal?
|
Go to Step 6. |
|
Repair or replace the failure section. |
|
STEP 3. Check for continuity in PDUP line between the A/T-ECU connector and the paddle shift switch connector. |
When the continuity check result is OK, check that the wiring harness is not shorted to
the body and other wiring harness. |
Q.
Is the check result normal?
|
Go to Step 4. |
|
Repair the connector(s) or wiring harness. |
|
STEP 4. Check the paddle shift switch. |
Refer to . |
Q.
Is the check result normal?
|
Go to Step 5. |
|
Repair or replace the failure section. |
|
STEP 5. Check the A/T-ECU connector, vehicle-side wiring harness connector pin terminal, and the connection status. |
Q.
Is the check result normal?
|
Replace the A/T-ECU. |
|
Repair or replace the failure section. |
|
STEP 6. Erase the diagnosis code, and drive the vehicle for a while. |
Check that the normal code is displayed. |
Q.
Is the check result normal?
|
The procedure is complete. |
|
Return to Step 1. |
|