|
1.Put on the parking
brake.
|
![](../../../img/23/ACC00042AB00ENG.png)
|
2.Move the selector lever to
every range and check that the lever moves smoothly with
secure
feel of engagement. 3.Make sure that the engine
starts when the selector lever is in the "N" or "P" range,
and does not start when the selector lever is in other
range. 4.Start the engine. Release the parking
brake. 5.Make sure that the vehicle moves forward
when the selector lever is moved to "D",
"Ds" range, or to the "L" range. Also make sure that the
vehicle moves backward when the selector
lever is moved from the "N" to "R" range. 6.Stop
the engine. 7.Turn ON the ignition switch, and
move the selector lever from the P to R range. Check
that the backup lamp comes on at this time.
note |
Since the vehicle is equipped
with the CVT wrong-operation preventive device,
the selector
lever cannot be moved out of the "P" position
without depressing the brake pedal after turning
"ON" the ignition switch.
|
|