|
1.
caution |
The A/T fluid
temperature should be between
70 - 90°C during the test.
|
Check the A/T fluid level and temperature.
Check engine coolant temperature.
- A/T fluid level: "H" mark on the
dipstick
- A/T fluid temperature: 70 -
90°C
- Engine coolant temperature: 80 -
100°C
|
|
2.Raise the vehicle so that
the wheels are free to turn.
|
|
3.Connect the special tools
(3.0 MPa oil pressure gauge [MD998330] and
adapters [MB992127]) to each pressure discharge
port. 4.Apply the parking brakes
fully. 5.Restart the engine. 6.Check
that there are no leaks around the special tool port
adapters. 7.At the "D" position, measure the
hydraulic pressure during idling (engine speed: 650 ±
50
r/min). Standard value: Approx. 0.385 -
0.525 MPa 8.
caution |
The throttle should not be
fully open for more than five seconds.
|
At the "D" position, fully depress the foot brake
pedal. Then fully depress the accelerator
pedal while checking the hydraulic pressure indicator, and
quickly read the maximum hydraulic
pressure. Standard value: Approx. 1.53
MPa 9.Stop the engine. 10.Remove
the O-ring from the port plug and replace
it. 11.Remove the special tool, and install the
plugs to the hydraulic pressure ports. 12.Start
the engine and check that there are no leaks around the
plugs.
|