DIAGNOSTIC PROCEDURE |
STEP 1. Check other diagnosis codes |
Q.
Are other diagnosis codes set?
|
Go to the appropriate troubleshooting. |
|
Go to Step 2. |
|
STEP 2. Check for short to earth in LRPS line between the CVT-ECU connector and the CVT assembly connector |
Q.
Is the check result normal?
|
Go to Step 3. |
|
Repair the connector(s) or wiring harness. |
|
STEP 3. Symptom recheck after erasing diagnosis code |
Q.
Is the check result normal?
|
Intermittent malfunction |
|
Replace the CVT-ECU, and then go to Step 4. |
|
STEP 4. Retest the system. |
Q.
Is the check result normal?
|
The inspection is complete. |
|
Replace the CVT assembly. |
|