|
1.Remove the filler plug and
gasket.
|
|
2.Check that the oil level
is in between the upper limit (bottom of the filler plug
hole)
and the lower limit as shown. 3.Check that the oil
is not excessively foul and has moderate
viscosity. 4.If the oil level is not in between
the upper limit and the lower limit, refill the
specified oil to the bottom of the oil filler plug
hole. Transfer oil: MITSUBISHI MOTORS GENUINE
super hypoid gear oil API classification
GL-5 SAE80 5.Install the filler plug and
new gasket, and tighten to the specified
torque. Tightening torque: 32 ±
2 N·m
|