|
Use the M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Repair the CAN bus lines, and then go to Step 2.
|
|
|
|
Q.
Is the diagnosis code set?
|
|
The inspection is complete.
|
|
|
|
Check if the ETACS-related diagnosis code is set.
|
|
Q.
Is the ETACS-related diagnosis code set?
|
|
Carry out the appropriate troubleshooting.
|
|
|
|
Using M.U.T.-III, check if any abnormality is present in the coding data below which is
stored in the ETACS-ECU.
|
|
Final drive
OK: Front Drive <2WD> OK: 4WD FF Base <4WD>
|
|
Q.
Is the check result normal?
|
|
Q.
Is the diagnosis code set?
|
|
Intermittent malfunction.
|
|
|