|
If a malfunction occurs in the CVT
system, any of "R", "N", "D", "Ds", "L" or "A" will
flash (one flash per two seconds) on the selector lever
position indicator in the multi-information
display.
note |
- The selector lever position indicator
"P" does not flash when a malfunction
occurs
in the CVT system.
- When the system is normal, the selector
lever position indicator "A" does not
illumination.
Only when a malfunction occurs in the
indicator switch, the indicator will
flash.
If the selector lever position indicator
flashes rapidly (one flash per one second), the
CVT fluid temperature is too high. (Illuminates
when the fluid temperature is approximately
138°C or higher, and goes out
automatically when the fluid temperature drops
below
approximately 135°C.)
|
|
|
If a malfunction relating to the
CVT system occurs, the symbol (A) will be displayed on
the information screen in the multi-information
display. Check if the diagnosis code is set when the
symbol (A) continues being displayed in the
information screen in the multi information display. When
the symbol (B) is displayed in the information screen in the
multi information display,
the CVT fluid temperature is high. (Symbol (B) is turned on
when the fluid temperature is approximately
138°C or higher and turned off automatically when the
fluid temperature drops below
approximately 135°C.)
|
|
Use M.U.T.-III to read the
diagnosis code (Refer to GROUP 00 - How to Use
Troubleshooting/Inspection
Service Points ).
|
|
Use M.U.T.-III to erase the
diagnosis code (Refer to GROUP 00 - How to Use
Troubleshooting/Inspection
Service Points ).
|