REMOVAL AND INSTALLATION


Pre-removal operation
  • Engine Room Under Cover Front A, B Removal.
  • CVT Fluid Draining. (Refer to )

 Post-installation operation
  • Engine Room Under Cover Front A, B Installation.
  • CVT Fluid Refilling. (Refer to )




Side oil seal (LH) removal steps


·
 Driveshaft (LH).
<<A>>
 >>A<<
 1.
 Side oil seal (LH)



Side oil seal (RH) removal steps <2WD>


·
 Driveshaft (RH).
<<B>>
 >>B<<
 2.
 Side oil seal (RH)

REMOVAL SERVICE POINTS

<<A>> SIDE OIL SEAL (LH) REMOVAL
caution When removing the side oil seal, be careful not to cause damage to the transmission case.

Using a flat blade screwdriver etc., remove the side oil seal from the transmission case.

<<B>> SIDE OIL SEAL (RH) REMOVAL
caution When removing the side oil seal, be careful not to cause damage to the converter housing.

Using a flat blade screwdriver etc., remove the side oil seal from the converter housing.

INSTALLATION SERVICE POINTS

>>A<< SIDE OIL SEAL (LH) INSTALLATION
caution
  • Do not re-use the side oil seal.
  • Apply CVT fluid when installing the side oil seal.

Using the oil seal installer (Special tool: MB992140) and handle (MB992075), install the side oil seal on the transmission case.

Depth from the case edge A:
Within -1.8 ± 0.5 mm (recessed)

>>B<< SIDE OIL SEAL (RH) INSTALLATION
caution
  • Do not re-use the side oil seal.
  • Apply CVT fluid when installing the side oil seal.

Using the oil seal installer (Special tool: MB992206) and handle (Special tool: MB992075), install the side oil seal on the converter housing.

Depth from the case edge A:
Within -6.3 ± 0.5 mm (recessed)