![](../../../img/23/AC705034AB00ENG.png)
|
1.While pressing A in the
figure, turn B anti-clockwise to unlock the CVT assembly
connector,
and disconnect the connector. 2.Measure the
resistance between the terminals of the applicable solenoid
valves and
the earth. Standard value:
|
Terminal
No.
|
Applicable
solenoid valve
|
Resistance
value Ω
|
1
|
Line pressure
solenoid valve
|
Approximately 5.6
- 6.6 (fluid temperature:
20°C)
|
2
|
Secondary pressure
solenoid valve
|
3
|
Lockup solenoid
valve
|
4
|
Lockup/select
switching solenoid
valve
|
Approximately 25.5
- 29.3 (fluid temperature:
20°C)
|
|
3.When the resistance is within the
standard value, check the power supply and the earth
circuits. 4.
caution |
Each solenoid valve cannot be
removed or replaced as
a single unit. When replacement of any one of
the solenoid valves is necessary, replace the
valve body assembly.
|
When the resistance is outside the standard value,
replace the valve body assembly and
the harness.
|