|
1.While pressing A in the
figure, turn B anti-clockwise to unlock the CVT assembly
connector,
and disconnect the connector.
2.Measure the
resistance between the terminals of the applicable solenoid
valves and
the earth.
|
|
Standard
value:
Terminal
No.
|
Applicable
solenoid valve
|
Resistance
value Ω
|
1
|
Line pressure
solenoid valve
|
- 5.5 - 7.0 (fluid
temperature:
20°C)
- 6.0 - 8.0 (fluid
temperature:
50°C)
- 6.5 - 8.5 (fluid
temperature:
80°C)
|
2
|
Primary pressure
solenoid valve
|
3
|
Secondary pressure
solenoid valve
|
4
|
Select solenoid
valve
|
5
|
Lock-up solenoid
valve
|
|
3.When the resistance is within the
standard value, check the power supply
circuits.
4.When the resistance is outside the
standard value, check the valve body harness. (Refer
to  )
(1)
If the valve body harness is defective, replace it. (Refer
to .)
(2)
|
|
| caution |
Each solenoid
valve cannot be removed or replaced
as
a single unit.
|
|
If the valve body wiring harness is normal, replace
the valve body assembly (Refer to ).
|