DISASSEMBLY AND REASSEMBLY



Disassembly steps
<<A>>
 >>C<<
 1.
 Nut
<<B>>
 >>B<<
 2.
 Reduction gear bearing
<<C>>
 >>A<<
 3.
 Reduction gear bearing


4.
 Reduction gear sub-assembly


5.
 Adjusting shim

DISASSEMBLY SERVICE POINT

<<A>> NUT REMOVAL

Remove the nut from the reduction gear sub-assembly.

<<B>> REDUCTION GEAR BEARING REMOVAL

caution Align the tang of special tool as shown in the diagram.

Using the special tools, remove the inner race of reduction gear bearing (converter housing side) from the reduction gear sub-assembly.

  • Side bearing puller (MB990810)
  • Lower arm push arbour (MB990947)
  • Crow (MD999566)

<<C>> REDUCTION GEAR BEARING REMOVAL

Using the special tools, remove the outer race of reduction gear bearing (transmission case side) from the reduction gear sub-assembly.

  • Mount bushing lower roll insulator arbour (MB990984)
  • Bearing remover (MD998917)

REASSEMBLY SERVICE POINT

>>A<< REDUCTION GEAR BEARING INSTALLATION
caution
  • Do not re-use the inner race.
  • Replace the inner race together with the outer race.

Using the special tools, install the inner race of reduction gear bearing (transmission case side) on the reduction gear sub-assembly.

  • Installer cap (MD998812)
  • Installer-100 (MD998813)
  • Installer adapter (MD998819)

>>B<< REDUCTION GEAR BEARING INSTALLATION
caution
  • Do not re-use the inner race.
  • Replace the inner race together with the outer race.

Using the special tools, install the inner race of reduction gear bearing (converter housing side) on the reduction gear sub-assembly.

  • Installer cap (MD998812)
  • Installer-100 (MD998813)
  • Installer adapter (MD998819)

>>C<< NUT INSTALLATION

Install the nut on the reduction gear sub-assembly to the specified torque of 250 N·m.