|
Use M.U.T.-III to perform the CAN bus diagnosis.
|
|
Q.
Is the check result normal?
|
|
Repair the CAN bus lines (Refer to GROUP 54C -
Troubleshooting). After
repairing the CAN bus line, go to Step 2.
|
|
|
|
Q.
Is diagnosis code No.C1242 set?
|
|
This diagnosis is complete.
|
|
|
|
Check the ASC diagnosis code (Refer to GROUP 35C -
Troubleshooting ).
|
|
Q.
Is the diagnosis code set?
|
|
Perform the relevant troubleshooting.
|
|
|
|
Check if the wheel speed sensor-related diagnosis code is set.
|
|
Q.
Is the diagnosis code set?
|
|
Perform the relevant troubleshooting.
|
|
|
|
Check that the hydraulic unit (integrated with G and yaw rate sensor) is installed correctly
(GROUP 35C -
Hydraulic unit (integrated with G and yaw rate sensor)).
|
|
Q.
Is the check result normal?
|
|
Reinstall the hydraulic unit (integrated with G and yaw rate sensor) correctly.
Then go to Step 6.
|
|
|
|
Check the following data list (Refer to ).
|
|
- Item No.24: Longitudinal G sensor
|
|
Q.
Is the check result normal?
|
|
Replace the hydraulic unit (integrated with G and yaw rate sensor) (Refer to GROUP
35C -
Hydraulic unit (integrated with G and yaw rate sensor)). Then go to Step 8.
|
|
|
|
Q.
Is diagnosis code No.C1242 set?
|
|
Replace the AWC-ECU (Refer to ). Then go to
Step 8.
|
|
|
|
Intermittent malfunction (Refer to GROUP 00 -
How to Cope with Intermittent
Malfunction).
|
|
|
|
Q.
Is diagnosis code No.C1242 set?
|
|
This diagnosis is complete.
|
|
|