![](../../../img/23/ACC04522AB00ENG.png)
|
2.For easy identification of
tyre rotation, mark the front and rear tyres as shown in the
figure. 3.Set the shift position to the
P-position, and turn ON the ignition switch. 4.Set
the wheel to the neutral position, and carry out the special
function test No. 4 "Control OFF". 5.Rotate the
left-front tyre anti-clockwise by your hand, and check that
the right-front tyre makes reverse rotation against the
left-front tyre. 6.Set the shift position to the
N-position, and turn ON the ignition switch. 7.Set
the wheel to the neutral position, and carry out the special
function test No. 5
"Front coupling operation check".
note |
Time limit for the special
function test No. 5
"Front coupling operation check" is 1
minute.
|
8.Rotate the left-front tyre anti-clockwise
by your hand, and check that the right-front tyre rotates to
the same direction, viewed from the left-front
tyre. Carry out the check above. Then when the tyre
operates as mentioned, it is judged that the AWC-ECU control
and electronic control coupling (front) are normal. If the
tyre does not operate as mentioned, replace the transfer
assembly. (Refer to .)
|