).Standard value: 1.8 - 4.0 Ω
2.Measure the resistance value between the connector terminal No.1 on the electronic control coupling side and the body earth. If the continuity exists, replace the transfer assembly (Refer to
). |
1.Disconnect the electronic
control coupling solenoid connector, and measure the
resistance
value between the connector terminals on the electronic
control coupling side. If the measured
resistance value is out of the standard value range, replace
the transfer assembly (Refer to ). Standard value: 1.8 - 4.0 Ω 2.Measure the resistance value between the connector terminal No.1 on the electronic control coupling side and the body earth. If the continuity exists, replace the transfer assembly (Refer to ). |