|
1.Place the gearshift lever
to the selector lever to the "N" position.
|
|
2.Check the propeller shaft
for dent, damage or crack.
|
|
3.Check the propeller shaft
universal joint, oil seal for crack or damage. If
abnormality
is recognized, replace the propeller shaft with a new
one.
|
|
1.Place the gearshift lever
to the selector lever to the "N" position.
|
|
2.Hold the tube of propeller
shaft by one hand, and apply force by the other hand to the
flange yoke or sleeve yoke in rotating direction, axial
direction, and perpendicular direction
for checking looseness. If looseness is recognized, replace
the propeller shaft with a new one.
|
|
1.Place the gearshift lever
to the selector lever to the "N" position.
|
|
2.Make phase alignment marks
on the flange yoke and differential companion flange and
disconnect the flange yoke.
|
|
3.Hold the tube of propeller
shaft by one hand, and apply force by the other hand to the
flange yoke in flection direction for checking flection. If
showing a sign of catch in the flection direction
is recognized, replace the propeller shaft with a new
one.
|