|
1.Remove the caliper
assembly and the brake disc. Retain the caliper assembly
with a
wire and the like to prevent from falling.
|
|
2.Set a dial gauge as shown
in the figure. Move the hub in the axial direction and
measure
the looseness. Limit: 0.05
mm 3.When the looseness exceeds the limit,
replace the rear wheel hub assembly. 4.After
checking, install the brake disc and the caliper assembly,
and tighten the caliper
mounting bolt to the specified
torque. Tightening torque: 58 ± 7
N·m
|