|
1.Remove the caliper
assembly and the brake disc. Retain the caliper assembly
with a
wire and the like to prevent from falling.
|
![](../../../img/27/AC302114AD00ENG.png)
|
2.Use special tool hub bolt
remover (MB991618) to remove the hub bolt.
|
![](../../../img/27/ACB05742AB00ENG.png)
|
3.After fixing the hub using
special tool front hub and flange yoke holder (MB990767),
install
the plain washer to the new hub bolt and tighten the bolt
with a nut. 4.Install the brake disc, caliper
assembly and tighten the caliper assembly mounting
bolts to the specified torque. Tightening
torque: 58 ± 7 N·m
|