|
(1)Turn the ignition switch from the "LOCK" (OFF) position to the "ON" position.
|
|
(2)Check that the 4WD-E/LOCK indicator lamps flash simultaneously when the
drive mode selector is switched to 4WD ECO, or 4WD LOCK position.
|
|
Q.
Does the 4WD-E/LOCK Indicator Lamps flash simultaneously?
|
|
![](../../../buttons/03btn001.png)
- When the drive system fluid temperature warning display
illuminates in the combination meter, cool down the electronic control coupling.
- When the drive system fluid temperature warning display does not illuminate in the
combination meter, referring to "Inspection Procedure 1: M.U.T.-III cannot Communicate with
the Electronically Controller 4WD System<ECU power supply circuit system check> ",
perform the check
.
|
|
|
|
Referring to the Inspection Chart for Trouble Symptoms, perform the check .
|
|
|