Code No.U1427: Wheel speed sensor data abnormal


caution
  • If there is any problem in the CAN bus lines, an incorrect diagnosis code may be stored. Prior to this diagnosis, diagnose the CAN bus lines.
  • Whenever the ECU is replaced, ensure that the CAN bus lines are normal.

OPERATION


4WD-ECU communicates with the ABS/ASC-ECU via the CAN bus lines.

DIAGNOSIS CODE SET CONDITION


This diagnosis code will be stored when an implausible wheel speed signal is sent by the ABS/ASC-ECU.

PROBABLE CAUSES



DIAGNOSIS PROCEDURE

STEP 1. M.U.T.-III CAN bus diagnostics.
Use M.U.T.-III to perform the CAN bus diagnosis.

Q. Is the check result normal?
Go to Step 2
Repair the CAN bus lines (Refer to GROUP 54C - Troubleshooting ).

STEP 2. M.U.T.-III other system diagnosis code.
Check the ABS diagnosis code (Refer to GROUP 35B - Troubleshooting ) <Vehicles with ABS> or the ASC diagnosis code (Refer to GROUP 35C - Troubleshooting ) <Vehicles with ASC>.

Q. Is the diagnosis code stored?
Perform the relevant troubleshooting.
Go to Step 3

STEP 3. M.U.T.-III data list.
Check the data list of the relevant wheel speed sensor (Refer to ).

  • Item No.18: FL Wheel speed sensor
  • Item No.19: FR Wheel speed sensor
  • Item No.20: RL Wheel speed sensor
  • Item No.21: RR Wheel speed sensor

Q. Is the check result normal?
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ).
Go to Step 4

STEP 4. Check whether the diagnosis code is stored again.

Q. Is diagnosis code No.U1427 stored?
Replace the 4WD-ECU (Refer to ). Then go to Step 5.
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ).

STEP 5. Check whether the diagnosis code is stored again.

Q. Is diagnosis code No.U1427 stored?
Return to Step 1.
This diagnosis is complete.