|
- Check the bushing
for wear and deterioration.
- Check the lower arm for bend or breakage.
- Check all bolts for condition and
straightness.
|
![](../../../img/33/AC404846AE00ENG.png)
|
1.Move the lower arm ball
joint stud back and forth for several times, and measure the
lower
arm ball joint rotation starting torque using special tool
preload socket (MB991006). Standard value: 0.3
- 9.0 N·m 2.If the measured
value exceeds the standard range, replace the lower arm
assembly (Refer
to ). 3.Even
if the measured value is within the standard range, check
the lower arm ball
joint that there is no looseness or gritty feeling. If there
is no looseness or gritty feeling,
it is judged as usable.
|