|
- Check the bushings for
wear and deterioration.
- Check the stabilizer bar for deterioration or
damage.
- Check all bolts for condition and
straightness.
|
|
1.Move the stabilizer link
ball joint stud back and forth for several times, install
the
stud with nut, and measure the stabilizer link ball joint
rotation starting torque using special tool
preload socket (MB990326). Standard value: 0.3
- 2.9 N·m 2.When the measured
value exceeds the standard range, replace the stabilizer
link (Refer
to ). 3.When
the measured value stays within the standard range, if there
is any looseness
or gritty feeling, it is judged as unusable and
replaced.
|