caution | The parts indicated by *
are
the bolts/nuts with friction coefficient stabilizer.
In removal, ensure there is no
damage, clean dust and soiling from the bearing and thread
surfaces, and tighten them to the specified
torque. |
REMOVAL SERVICE POINT |
<<A>> TOE ADJUSTING BOLT/CONTROL LINK REMOVAL |
Make a mating mark on the toe
adjusting bolt, and remove the control link. |
<<B>> LOWER ARM AND TRAILING ARM/SHOCK ABSORBER AND LOWER ARM DISCONNECTION |
While jacking-up the lower arm with
garage jack, remove the mounting bolts. |
INSTALLATION SERVICE POINT |
>>A<< UPPER ARM INSTALLATION |
Install the upper arm so that the
hole faces the body side. |
>>B<< TOE ADJUSTING BOLT/CONTROL LINK INSTALLATION |
|