|
1.Before the wheel alignment
measurement, adjust the rear suspension, wheel, and tyres
in good condition.
|
|
2.Park the vehicle on a
level surface to measure the wheel alignment.
|
|
Standard
value:
At the centre of tyre tread: 3
± 2 mm Toe-angle (per wheel): 0 °
02’ - 0 °
12’
|
|
If it is out of the standard range,
adjust as follows:
|
![](../../../img/34/ACC01867AB00ENG.png)
|
Turn the toe adjusting bolt (the
mounting bolt inside the body on the control link) to
adjust. Left wheels: Clockwise (+) Toe
in Right wheels: Clockwise (-) Toe
in Toe-in varies approximately 3.2 mm (equivalent
to 0°16’ of
the toe angle for one side) for each scale mark.
|
|
Standard value:
-0°30’ ±
0°45’
|
![](../../../img/34/AC305848AC00ENG.png)
|
note |
- Difference between right and left wheels
must be 0°30’ or
less.
- The camber is pre-adjusted at factory
and is not adjustable.
- As for vehicles with aluminium wheel,
use a compensator to measure the camber
and caster.
|
|