REMOVAL AND INSTALLATION


Pre-removal Operation
  • Parking Brake Rear Cable Connection (Rear Brake Caliper Side) Removal (Refer to GROUP 36 - Parking Brake Cable) <Vehicles without Electric Parking Brake>.
  • Activates the maintenance mode (when rear brake calliper assembly is disassembled and reassembled) (Refer to ) <Vehicles with electric parking brake>.
  • Brake Fluid Draining

 Post-installation Operation
  • Brake Fluid Supplying and Air Bleeding.
  • Parking Brake Rear Cable Connection (rear brake caliper side) Installation (Refer to GROUP 36 - Parking Brake Cable) <Vehicles without Electric Parking Brake>.
  • Resumes the normal operation mode (when rear brake calliper assembly is disassembled and reassembled) (Refer to ) <Vehicles with electric parking brake>.

<Vehicles without electric parking brake>

Removal steps


1.
 Brake hose connection bolt


2.
 Gasket

>>A<<
 3.
 Brake hose (rear brake caliper side)


4.
 Rear brake caliper assembly


·
 Brake disc run-out check and correction (only at installation).


5.
 Rear brake disc


6.
 Hose clip


7.
 Bracket A


8.
 Brake tube (trailing arm side)


9.
 Clip


10.
 Brake tube (body floor side)


11.
 Bracket B

<Vehicles with electric parking brake>

Removal steps


1.
 Electric parking brake actuator assembly connector connection.


2.
 Brake hose connection bolt


3.
 Gasket


4.
 Rear brake caliper assembly


·
 Brake disc run-out check and correction (only at installation).


5.
 Rear brake disc

>>A<<
 6.
 Brake hose (rear brake caliper side)


7.
 Bracket A


8.
 Brake tube (trailing arm side)


9.
 Clip


10.
 Clamp


11.
 Brake tube (body floor side)


12.
 Bracket B

INSTALLATION SERVICE POINT
For installation service points, follow the same service procedures as before.