|
1.
caution |
If there is a significant
difference in thickness between
the brake pads at right and left, check the
sliding area and the run-out of the brake disc
(Refer
to ).
|
Visually check the thickness of brake pad from the
inspection hole of the caliper body. Standard
value: 10.0 mm Limit: 2.0 mm 2.If the
brake pad thickness is less than the limit value, replace
the brake pad (Refer
to ).
|
|
1.
caution |
If there is a significant
difference in thickness between
the brake pads at right and left, check the
sliding area and the run-out of the brake disc
(Refer
to ).
|
Visually check the thickness of brake pad from the
inspection hole of the caliper body. 9.0
mm 1.5 mm 2.If the brake pad thickness
is less than the limit value, replace the brake pad (Refer
to ).
|