REMOVAL AND INSTALLATION <REAR>

caution

The vehicle speed detection encoder collects any metallic particle easily, because it is magnetized. Make sure that the encoder should not collect any metallic particle. Check that there is not any trouble prior to reassembling it.

<2WD>

Pre-removal and post-installation operationQuarter trim removal and installation (Refer to GROUP 52A - Trim).

		Removal steps
>>B<<	1.	Bolt (rear wheel speed sensor and trailing arm assembly connection)
>>B<<	2.	O ring
	3.	Rear wheel speed sensor connector
>>A<<	4.	Rear wheel speed sensor grommet
>>B<<	5.	Rear wheel speed sensor

note

The vehicle speed detection encoder is integrated with the rear hub assembly, which cannot be disassembled.

<4WD>

Pre-removal and post-installation operationQuarter trim removal and installation (Refer to GROUP 52A - Trim).

		Removal steps
>>C<<	1.	Rear wheel speed sensor and trailing arm assembly connection
>>A<<	2.	Rear wheel speed sensor grommet
	3.	Rear wheel speed sensor connector
	4.	Rear wheel speed sensor

note

The vehicle speed detection encoder is integrated with the rear hub assembly, which cannot be disassembled.

INSTALLATION SERVICE POINT

For installation service points, follow the same service procedures as before.