|
1.
caution |
- Do not connect the battery terminals in
reverse as the wheel speed sensor may be
damaged.
- When the current value is measured by
the wheel speed sensor connector,
measure it with the wheel speed sensor
installed in the vehicle.
|
Connect the circuit tester to the wheel speed sensor
using the special tool extra fine probe (MB992006), and
measure the sensor current as a single
unit. Standard value: 5.9 to 8.4 mA or 11.8 to
16.8 mA 2.If the measurement value is not
within the standard value range, replace the wheel speed
sensor with a new one.
|
|
1.Connect the circuit tester
to the wheel speed sensor using the special tool extra fine
probe (MB992006), and measure the insulation resistance
between the terminal No. 1/2 and the wheel speed
sensor body as a single unit. Standard value: 5
MΩ
or more 2.If the insulation resistance is
not within the standard value range, replace the wheel speed
sensor with a new one.
|