|
Check that ABS and brake warning
lamps illuminate as follows.
|
![](../../../img/35/ACC00028AB00ENG.png)
|
1.When the ignition switch
is turned to the ON position, ABS and brake warning lamps
illuminate. 2.The ABS and brake warning lamps
illuminate for three seconds*1 and
then turn OFF*2. 3.Otherwise,
check the diagnosis code.
note |
- *1: The ABS warning
lamp may stay ON until the vehicle speed
reaches 10 km/h. As far as ABS-ECU
stores any diagnosis code related to the
wheel speed
sensor malfunction or the motor
malfunction as past trouble, ABS-ECU
continues illuminating
the ABS warning lamp until it verifies
that the malfunction for that code is
resolved (startup
check).
- *2: The brake warning
lamp does not turn OFF when the parking
brake is applied or the brake fluid
level is lowered.
|
|