|
ASC-ECU sends the signal to the engine ECU as necessary to decrease the engine output
for the ASC system operation.
|
|
This diagnosis code is set when the request for the decrease of output is rejected by
the engine ECU.
|
|
- Wrong coding of engine ECU
- Engine ECU malfunction
- ASC-ECU malfunction
- External noise interference
|
|
Use M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Repair the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table ).
On completion, go to Step 2.
|
|
|
|
Q.
Is diagnosis code No.C121C set?
|
|
This diagnosis is complete.
|
|
|
|
Use M.U.T.-III to check that the diagnosis code is set in the engine ECU.
|
|
Q.
Is the diagnosis code set?
|
|
Troubleshoot the engine ECU diagnosis code (Refer to GROUP 13A - Troubleshooting/Diagnosis
function <4B1> or GROUP 13B - Troubleshooting/Diagnosis
function <6B3>), and then go to Step 7.
|
|
|
|
Check that diagnosis code No.C1707 is set in ASC-ECU.
|
|
Q.
Is diagnosis code No.C1707 set?
|
|
Troubleshoot for diagnosis code No.C1707 (Refer to ).
Then go to Step 5.
|
|
|
|
Replace the hydraulic unit (integrated with ASC-ECU) (Refer to ).
Then go to Step 7.
|
|
|
|
Check the following service data (Refer to ).
|
|
- Item 68: Allow ESP torque request
|
|
Q.
Is the check result normal?
|
|
Replace the engine ECU (Refer to GROUP 13A - Engine-ECU <4B1>,
GROUP 13B - Engine-ECU <6B3>), and then go to
Step 7.
|
|
|
|
Erase the diagnosis code.
|
|
Q.
Is diagnosis code No.C121C set?
|
|
Replace the hydraulic unit (integrated with ASC-ECU) (Refer to ).
Then go to Step 7.
|
|
|
|
If the trouble symptom is resolved, an intermittent malfunction such as poorly
engaged connector(s) or wiring harness is suspected (Refer to GROUP 00 - How to Use
Troubleshooting/How to Cope with Intermittent Malfunctions ).
|
|
|
|
Erase the diagnosis code.
|
|
Q.
Is diagnosis code No.C121C set?
|
|
This diagnosis is complete.
|
|
|