![](../../../img/36/ACB06000AC00ENG.png)
|
Compress the tabs on the cable
retainer to pull out the parking rear cable through the
parking lever hole of the rear brake caliper
assembly.
|
![](../../../img/36/ACC00342AB00ENG.png)
|
note |
- When pulling out the parking rear cable,
be careful not to damage the tab on the
cable retainer.
- Example: Insert the 12.8-mm hose clip
(MB248923) into the parking rear cable.
Then push
the clip over the cable retainer to
protect the tabs.
|
|
|
1.Guide the parking brake
rear cable through the parking lever hole of the rear brake
caliper assembly to the cable retainer.
|
![](../../../img/36/ACB06000AB00ENG.png)
|
2.Pull back the parking
brake rear cable to assure it is tightly fastened to the
cable retainer.
|
![](../../../img/36/AC903102AB01ENG.png)
|
Connect the parking brake rear
cable to the equaliser as shown in the figure.
|