|
|
1.With the vehicle parked,
move the selector lever to P position. Then chock the
wheels.
|
|
|
2.Disconnect the negative
battery terminal.
|
|
3.
| caution |
If signs of dirt or water are
found around the connector, clean it thoroughly.
Ensure that no foreign materials intrude into
the connector.
|
Disconnect the wiring harness connector from the
electric parking actuator.
|
|
4.Remove the two bolts to
remove the electric parking actuator from the rear brake
calliper assembly.
|
|
5.Insert an hexagonal wrench
(6 mm) to the rear brake calliper assembly, and then turn
the wrench clockwise.
| warning |
Depress the brake pedal before
releasing the parking brake. If not, the vehicle
will start to move as soon as you release the
parking brake.
|
| caution |
- The O-ring cannot be reused. When you
reinstall the actuator, replace the
O-ring with new one.
- Ensure that the brake fluid does not
overflow.
|
| note |
For how to install the
electric parking actuator, refer to  .
|
|