|
1.
caution |
When holding the steering gear
in a vice, secure its mounting positions.
If it is secured in any other place, the gear
housing may become deformed or damaged.
|
Using special tool preload socket (MB991006), rotate
the pinion gear at the rate of one
rotation in approximately 4 to 6 seconds to check the total
pinion torque. Standard
value:
Total rotational torque: 0.7
- 1.3 N·m Torque fluctuation: 0.7
N·m or less
note |
When measuring, remove the
bellows from the rack housing. Measure the
pinion torque through
the whole stroke of the rack.
|
2.If not within the specification, replace
the steering gear and linkage assembly (Refer
to ).
|