|
1.Use a drill to make a hole
just deeply enough for the tap to stand on the steering lock
bolt.
|
![](../../../img/37/AC705585AF00ENG.png)
|
2.Remove the steering lock
bolt using the screw extractor (Recommended tool: MB992684),
or equivalent.
|
![](../../../img/37/AC905466AD00ENG.png)
![](../../../img/37/AC905467AC00ENG.png)
|
1.Secure the steering lock
bracket to the steering lock with steering lock bolt
(Upper). Tighten the steering lock bolt until its head is
broken off.
|
![](../../../img/37/AC905487AE00ENG.png)
|
2.Insert the steering lock
into the tip of the column shaft, fit the protrusion of the
steering lock to the hole of the steering column shaft
assembly, install the steering lock and tighten the steering
lock bolt (lower) until its head is broken off.
caution |
As for the mechanical steering
lock for vehicles with CVT, connect the body
side wiring harness connector to the steering
lock solenoid connector. Do not connect the
harness connector to the steering lock solenoid
dummy connector. As for the mechanical steering
lock for vehicles with M/T, connect the
body side wiring harness connector to the
steering lock solenoid dummy connector.
|
|