Code No. U1195 Coding not completed
Code No. U1197 Coding data unavailable
|
caution |
- If there is any problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis, diagnose the CAN bus lines (Refer to GROUP 54C, CAN Bus Diagnostics Table
).
- Whenever ECU is replaced, ensure that the CAN bus lines are normal.
|
|
|
EPS-ECU receives variant coding data from the ETACS-ECU.
|
|
The coding data is sent to the EPS-ECU for motor control.
|
|
Check Conditions
- The power supply circuit system diagnosis code (No. C1540, C1541) is not set.
- The ETACS circuit system diagnosis code is not set.
|
|
Judgement Criterion
- The electric power steering-ECU coding is not completed.
- The abnormal coding data is sent from the ETACS-ECU, and the microcomputer determines that there is a problem in the system.
|
|
Fail Safe, Back Up Function
The EPS-ECU prohibits the motor control, and stores diagnosis codes No. U1195 and U1197.
|
|
- Malfunction of CAN bus line
- Malfunction of the EPS-ECU
- Malfunction of the ETACS-ECU
|
|
STEP 1. M.U.T.-III CAN bus diagnostics
|
|
Use M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Go to Step 3
|
|
|
|
Repair the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table ). On completion, go to Step 2
|
|
|
|
STEP 2. Diagnosis code recheck after resetting CAN bus lines
|
|
(1)Erase the diagnosis code.
|
|
(2)Turn the ignition switch from the "LOCK" (OFF) position to the "ON" position.
|
|
(3)Check if the diagnosis code is set.
|
|
Q.
Is the diagnosis codes U1195, U1197 set?
|
|
Go to Step 3
|
|
|
|
This diagnosis is complete.
|
|
|
|
STEP 3. M.U.T.-III other system diagnosis code
|
|
Use M.U.T.-III to check whether the ETACS-ECU-related or engine ECU-related diagnosis code is set or not.
|
|
Q.
Is any diagnosis code set?
|
|
Troubleshoot for the relevant diagnosis code.
|
|
|
|
Go to Step 4
|
|
|
|
STEP 4. Check whether the diagnosis code is reset.
|
|
(1)Erase the diagnosis code.
|
|
(2)Turn the ignition switch from the "LOCK" (OFF) position to the "ON" position.
|
|
(3)Check if the diagnosis code is set.
|
|
Q.
Is the diagnosis codes U1195, U1197 set?
|
|
Replace the EPS-ECU (Refer to ). Then go to Step 5.
|
|
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction .
|
|
|
|
STEP 5. Check whether the diagnosis code is reset.
|
|
(1)Erase the diagnosis code.
|
|
(2)Turn the ignition switch from the "LOCK" (OFF) position to the "ON" position.
|
|
(3)Check if the diagnosis code is set.
|
|
Q.
Is the diagnosis codes U1195, U1197 set?
|
|
Return to Step 1.
|
|
|
|
This diagnosis is complete.
|
|
|