|
1.Remove the rear end trim
(Refer to GROUP 52A - Interior Trims ).
|
|
2.Replace the striker
mounting screws with temporary bolts, and use the remover
bar (special
tool: MB990939) and a hammer to tap the temporary bolt to
the desired direction. 3.Tighten the striker
mounting screws. Tightening torque: 22 ±
3 N·m 4.Install the rear end trim
(Refer to GROUP 52A - Interior Trims ).
|
|
1.Loosen the tailgate hinge
mounting bolts to adjust the clearance between the tailgate
and body. 2.Tighten the tailgate hinge mounting
bolts. Tightening torque: 12 ± 2
N·m
|