|
1.Remove the sunroof fuse to
check that it is normal, and then connect a circuit tester
as shown. 2.Operate the sunroof switch to ON, and
measure at the intermediate section other than
the sunroof activated, fully opened, and fully opened
positions. Standard value: 7 A or less (at
20°C) 3.Check the following areas if
the operating current of the sunroof lid glass exceeds
the standard value.
- Sunroof assembly assembling state, deformation and
biting of
any foreign substances.
- Drive cable fastening
- Tilting of sunroof lid glass
|