DISASSEMBLY AND REASSEMBLY


Post-installation operationOperation check of the keyless operation key




Disassembly steps
<<A>>
1.
 Emergency key
<<B>>
2.
 Upper cover
<<B>>
3.
 Transmitter assembly
<<B>>
 >>A<<
 4.
 Battery
<<B>>
5.
 Lower cover

DISASSEMBLY SERVICE POINTS

<<A>> EMERGENCY KEY REMOVAL

Move the lever on the lower cover to the direction shown by the arrow to remove the emergency key from the keyless operation key.

<<B>> UPPER COVER/TRANSMITTER ASSEMBLY/BATTERY/LOWER COVER REMOVAL

Set a flat-tipped screwdriver wrapped with protective tape as shown in the figure, and pry off the keyless operation key.

REASSEMBLY SERVICE POINT

>>A<< BATTERY INSTALLATION

Install a battery with the positive side facing toward the lower cover.
Replacement battery: Coin-type lithium battery CR2032