REMOVAL AND INSTALLATION


The following mark has been added.


INSTALLATION SERVICE POINT

S-AWC MARK INSTALLATION
1.Use Parts Cleaner (MZ100387 or equivalent) to clean the mark installation surfaces on the body.
2.
caution When attaching the marks, the ambient temperature should be 20 - 38°C and the air should be completely free of dust. If the ambient temperature is lower than 20°C, the marks and the places on the vehicle body where the marks are to be attached should be heated to 20 - 30°C.
Peel off the protection sheet on the back of the marks to paste it on the installation position.