REMOVAL AND INSTALLATION


The following bolts and screws are used for installing the instrument panel: The bolts and screws are indicated by symbols in the illustrations in sections "REMOVAL AND INSTALLATION" and "DISASSEMBLY AND ASSEMBLY."
Name
 Symbol
 Size (D × L) mm
 Colour
 Shape
Tapping screw
 a
 5 × 14
 -

b
 5 × 16
 -

Bolt with washer
 c
 6 × 16
 -

caution
  • For the removal of the front passenger’s air bag module, refer to GROUP 52B - Service Precautions , Driver’s and Front Passenger’s Air Bag Module, and Clock Spring before operation.
  • Do not subject SRS-ECU to any shocks when removing or installing the instrument panel.




Removal steps


1.
 Steering column upper cover


2.
 Steering column lower cover


3.
 Ignition key cover


4.
 Centre panel assembly


5.
 Radio and CD player assembly


6.
 2DIN bezel


7.
 Hazard indicators assembly


8
 Heater controller assembly (Refer to GROUP 55 - Heater control unit .)


9.
 Side air outlet panel assembly


10.
 Combination meter bezel


11.
 Bottom cover assembly (driver’s side)


12.
 Side cover


13.
 Instrument panel lower <Vehicles with Knee air bag>


14.
 Centre lower panel assembly


15.
 Instrument panel lower RH <Vehicles with Knee air bag>


16.
 Instrument panel lower <Vehicles without Knee air bag>


·.
 Front floor console assembly (Refer to ).


17.
 Centre lower box assembly


18.
 Bottom cover assembly (passenger’s side)


19.
 Glove box


20.
 Glove box assembly


21.
 Ornament panel assembly


·
 Glove box lamp connector


·
 Passenger’s (front) air bag module connector connection (Refer to GROUP 52B - Passenger’s (front) air bag module .)


·
 Front pillar trim (Refer to ).


22.
 Instrument panel assembly

CLIP AND CLAW POSITIONS




note Each number in the illustration indicates a part number.