|
Use M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Repair the CAN bus lines (refer to Group 54C -
Troubleshooting ).
|
|
|
|
(1)Connect the negative battery terminal.
|
|
Q.
Does the SRS warning light illuminate for approximately 6 to 8 seconds and then go
out after the ignition switch is turned to the "ON" position?
|
|
Intermittent malfunction (Refer to GROUP 00 -
How to Use Troubleshooting/Inspection
Service Points -
How to Cope with Intermittent Malfunction ).
|
|
|
|
Use M.U.T.-III to perform the combination meter actuator tests.
|
|
Q.
Does the SRS warning lamp turn on and off normally?
|
|
Replace the combination meter (Refer to GROUP 54A -
combination meter ).
|
|
|
|
After erasing the diagnosis code memory, check the diagnosis code.
|
|
Q.
Is the diagnosis code set?
|
|
Troubleshoot for the relevant diagnosis code. (Refer to .)
|
|
|
|
Q.
Does the lamp stay ON?
|
|
Replace the SRS-ECU (Refer to ).
|
|
|
|
This diagnosis is complete.
|
|
|