|
caution |
- Never measure the side-airbag module
(squib) circuit resistance even with the
specified tester. Measuring the circuit
resistance with a tester causes
accidental air bag deployment due to
current that flows or static, resulting
in serious personal injury.
- When replacing the parts, discard the
old parts after deploying the air bag
according to the specified procedure
(Refer to ).
|
If any malfunction is found in the following
inspections, replace the front seatback pad and frame
assembly with the new one. Discard the removed front
seatback pad and frame assembly after deploying the air bag
according to the specified procedure (Refer to ).
- Dent or deformation to side-airbag module deployment
part
- Check the harness and connector for damage and the
terminal for deformation.
|