REMOVAL AND INSTALLATION


Pre-removal Operation
  • Front Bumper Assembly Removal (Refer to GROUP 51- Front Bumper Assembly ).
  • Front Bumper Reinforcement A Removal (Refer to GROUP 42A - Loose panel ).

 Post-installation Operation
  • Front Bumper Reinforcement A Installation (Refer to GROUP 42A - Loose panel ).
  • Front Bumper Assembly Installation (Refer to GROUP 51 - Front Bumper Assembly ).
  • Headlamp Aiming Adjustment (Refer to ).




Removal Steps

>>A<<
 1.
 Headlamp assembly


2.
 Grommet

INSTALLATION SERVICE POINT

>>A<< HEADLAMP ASSEMBLY INSTALLATION

Tighten the mounting screw and bolts to the specified torque in the order shown.
Tightening torque:

    Screw(1): 1.5 ± 0.3 N·m
    Bolt(2 to 5): 4.5 ± 1.5 N·m