|
(1)Disconnect the connector, and measure at the wiring harness side.
|
|
(2)Measure the resistance between the connector terminal of lamp which does not illuminate
and the body earth.
- Measure the resistance between the headlamp assembly (position: LH) or (position:
RH) connector (earth terminals) and body earth.
- Measure the resistance between the rear combination lamp (tail: LH) or (tail: RH) connector
(earth terminals) and body earth.
- Measure the resistance between the tail lamp (LH) or (RH) connector (earth terminals)
and body earth.
- Measure the resistance between the licence plate lamp (LH) or (RH) connector (earth terminals)
and body earth.
OK: Continuity exists (2 Ω or less)
|