![](../../../img/54/AC809168AB00ENG.png)
|
1.Disconnect the sensor
connector and connect special tool test harness (MB991658)
as shown. 2.Turn the ignition switch to the "ON"
position. 3.Measure the voltage of sensor
connector terminal No. 2.
|
![](../../../img/54/AC507192AB00ENG.png)
|
4.Check that voltages show
the values described in the graph according to the sensor
operation
angle.
|
![](../../../img/54/ACB05768AB00ENG.png)
|
1.Disconnect the sensor
connector and connect special tool test harness (MB991658)
as shown. 2.Turn the ignition switch to the "ON"
position. 3.Measure the voltage of sensor
connector terminal No. 2.
|
![](../../../img/54/ACB05771AB00ENG.png)
|
4.Check that voltages show
the values described in the graph according to the sensor
operation
angle.
|