TROUBLE SYMPTOM CHART


caution
  • When you replace the camera-ECU, you should teach the camera-ECU for the multi-around monitor by writing a learned value. On completion, you should check the camera image on the multi around monitor "Bird’s eye-view." If necessary, calibrate the camera (Refer to ).
  • When you remove/install or replace the camera, you should check the camera image on the multi around monitor "Bird’s eye-view." If necessary, calibrate the camera (Refer to ).
Trouble symptom
 Inspection Procedure No.
 Reference page
Check the camera-ECU power supply circuit.
 Vehicles without Auto Stop & Go (AS&G) System
 1
Vehicles with Auto Stop & Go (AS&G) System
No image is displayed.
 2
Any of the camera images is blue.
 3
The image is not switched when the selector lever is moved to the R position.
 4
A screen is not switched when the vehicle speed reaches a predetermined value.
 5
A camera image is displayed when the selector lever is moved to the R position, but it is not switched when the camera switch is pressed.
 6