Code No.B2548
Calibration not completed
TROUBLE JUDGEMENT
When the camera-ECU has not been calibrated, diagnosis code No.B2548 will be set.
note |
- "!" mark is displayed against the camera, which has not been calibrated yet, when
diagnosis code No.B2548 is set.
- Diagnosis code No.B2548 will be erased automatically after learned values are written
to the camera-ECU successfully or a relevant camera has been calibrated.
|
PROBABLE CAUSES
- The camera-ECU not calibrated
- Malfunction of camera-ECU
DIAGNOSIS PROCEDURE
Check whether the diagnosis code is set again.
Calibrate the camera-ECU, and check again if the diagnosis code is set in the camera-ECU.
|
(1)Calibrate the camera-ECU (Refer to ).
|
|
(2)Turn the ignition switch from the "LOCK" (OFF) position to the "ON" position.
|
|
(3)Check if diagnosis code is set.
|
Q.
Is the diagnosis code set?
Repeat the calibration (Refer to ).
The procedure is complete.