Error code
|
Cause
|
Cause of trouble and its solution
|
CD
CHECK DISC
|
Focus error
|
These error codes will be shown if there is any problem
with the CD or there is excessive vibration on the vehicle. If the error codes are not displayed
when the vehicle is stopped and another CD is inserted, there is a problem with the CD. Check
if there is any of the following problems with the CD.
- Contamination, scratch, or deformation
- Formation of moisture or grease
Repair the CD and insert it again. Then, check that no error appears.
|
CD
DISC ERROR
|
Abnormal disc
|
CD
INTERNAL E
|
Mechanical error
|
This error codes will be shown if there is any internal mechanical
or electrical problem in the radio and CD player. Replace the radio and CD player check that
no error codes are shown.
|
CD
HEAT ERROR
|
Protection against high temperature
|
If the internal temperature is extremely high, this error code will
be shown. Turn off the radio and CD player and wait audio until they cool down. Wait for a while,
and then turn on the radio and CD player again. Check that the same error does not appear.
|
USB
FILE ERROR
|
File error
|
Displayed when an unsupported file is attempted to play. Change it
with a supported file.
|
USB
USB BUS PWR
|
Overcurrent abnormality
|
Displayed if there is any problem in the VBUS terminal of the radio
and CD player. Turn off the radio and CD player. Wait for a while, and then turn on the radio
and CD player again. If the error code does not disappear, proceed to "The USB data cannot
be replayed" (Refer to ).
|
USB
LSI ERROR
|
USB internal error
|
Displayed if there is any problem in the USB-LSI in the radio and
CD player. Turn off the radio and CD player. Wait for a while, and then turn on the radio and
CD player again. If the error code is displayed, replace the radio and CD player.
|
USB
UNSUPPORTED FORMAT
|
Unsupported format
|
Displayed when the file format stored in the USB device is not supported.
Use a supported file format.
|
USB
UNSUPPORTED DEVICE
|
Unsupported device
|
Displayed when an unsupported USB device is connected. Change it
with an supported USB device.
|
iPod
NO SONG
|
No playable music file is found.
|
No playable music file is stored in the iPod. Store music files to
the iPod®.
|
iPod
VER ERROR
|
iPod®
cannot be recognised
|
iPod®
itself or software is not supported. Use the supported
iPod®.
|
ERROR DC
|
Detection abnormal output to the speaker
|
This error code will be shown if the radio and CD player has an internal
error or is contaminated with the foreign material, and there is a problem with output to the
speaker. If it is contaminated with the foreign material, turn OFF the power. Dry the foreign
material if it is liquid, and remove it if it is solid. Then, check if the error code is displayed.
If the error code is displayed, replace the radio and CD player.
|