|
Enter the diagnosis mode according
to the following steps:
|
|
1.Turn the Ignition switch
to the "ACC" or "ON" position and switch off the radio and
CD player.
|
![](../../../img/54/ACC00428AC00ENG.png)
|
2.Press the following
buttons in that order within sixty seconds from step
(1). (1)
[CH1] button. (2)
Rewind button. (3)
Fast-forward button. (4)
[CH4] button.
note |
- When the "Power" button of the radio and
CD player is pressed during the
diagnosis
mode, the diagnosis mode will be
cancelled, thus switching off the radio
and CD player. However,
if the "Power" button is pressed while
the hands free-ECU is being updated, the
update will
not be cancelled.
- When the "Mode change" button is pressed
during diagnosis mode except the hands
free-ECU update, the diagnosis mode will
be cancelled and relevant operation will
be carried
out.
- When an invalid button is pressed during
diagnosis mode except the hands free-ECU
update, the diagnosis mode will be
cancelled, thus switching off the radio
and CD player.
- During the diagnosis mode, voice which
is input through the microphone unit is
played
through a relevant loudspeaker.
|
|
![](../../../img/54/ACC01048AC00ENG.png)
|
3."DIAG MODE" is
displayed. 4.When "DIAG MODE" remains displayed
for at least 2 seconds or the "SEL" button is turned
clockwise, "Version Info" will be displayed (audio version
information display mode). If the
"SEL" button is turned clockwise further, the screen will
switch to "RADIO DIAG" (radio diagnosis
mode), "HFM DIAG" (hands free-ECU diagnosis mode)
<vehicles with hands-free interface
system> in that order.
|