|
1.Turn the ignition switch
to "ACC" or "ON" position.
|
|
2.Press the "SPEECH"
switch. 3.Say "Setup." 4.Say
"Pairing options." 5.The voice guide will say
"Select one of the following: pair, edit, delete, or list?" 6.Say
"Pair." 7.The voice guide will say
"Please say a 4-digit pairing code." 8.Say a 4
digit number. The 4 digit number will be registered as a
pairing code for
the device.
- When the confirmation function is on, the system
will confirm whether the
number said is acceptable. Answer "Yes" to go Step
8. Say "No" to return to pairing code
selection.
note |
- The pairing code entered here is only
used for the Bluetooth®
connection
certification. It is any 4-digit number
the user would like to select. A
predetermined 4-digit
number may be assigned to some
Bluetooth®
devices.
- Remember the pairing code as it needs to
be keyed into the device later in the
pairing
process.
- Depending on the connection settings of
the Bluetooth® device,
this code may have to be entered each
time you connect the
Bluetooth® device
to the hands free-ECU. For the default
connection settings, refer to the
instructions for device.
|
9.The voice guide will say "Start pairing
procedure on device. See device manual for
instructions." Refer to the owner’s manual for your
device and enter into the device
the pairing code that was registered in Step
7. 10.When this system finds a
Bluetooth® device, the voice guide will
say
"Please say the name of the device after the beep." 11.After
you hear the beep, name the device by saying a name of your
preference.
note |
When the confirmation function
is on, after repeating the device tag you have
said, the
voice guide will ask "Is this correct?" Answer
"Yes". To change the device tag, answer
"No" and then say the device tag again.
|
12.The voice guide will say
"Pairing complete," after which a beep will be played and
the pairing process will end.
|
|
1.Turn the ignition switch
to "ACC" or "ON" position.
|
|
2.Press the Speech
switch.
|
|
5.The voice guide will say
"Select one of the following: pair, edit, delete, or list"
|
|
7.After the voice guide says
"Please say," the numbers of the devices and device tags
of corresponding devices will be read out in order, starting
with the device that has been most recently
connected. After it completes reading all pairs, the voice
guide will say "or all." Say
the number of the device that you want to delete from the
system. If you want to delete
all paired devices from the system, say "All."
|
|
8.For confirmation purposes,
the voice guide will say "Deleting (device tag) (number).
Is this correct?" or
"Deleting all devices, Is this correct?"
|
|
9.Answer "Yes" to delete the
devices. Answer "No" the system will return to
Step 5.
|
|
10.The voice guide will say
"Deleted", and then the system will end the device deletion
process.
- If the device deletion process fails for some
reason, the voice guide will
say "Delete failed." and then the system will cancel
deleting the device.
|